It worked! My cunning plan worked. Instead of using magazine pictures, I successfully put the Snook’s and my faces under the marbles. (Apologies for my crappy camera. They really do look pretty good.) I’d read that using Bubble Jet-printed images wouldn’t work, because the ink is water soluble and runs when you put the glue on it. I had a hunch that color laser printed photos would work better. And they did!
I tried to follow Megan’s instructions as closely as possible. For you Sydneysiders: I found the magnets (20 mm diameter) at the big Lincraft store in the Imperial Arcade on Pitt Street. They were randomly hanging in the aisle with all the clay. For glue, I got silicone window sealer from my local Mitre 10 hardware store. It came with a long plastic cone/applicator, but I just tossed that. The marbles, as you all know, were the difficult part. In the end I found them at Eastern Flair on King Street in Newtown. (I bought all the clear ones they had, though, so don’t bother trying them for a while.) I also heard that the “Reject Shop” on Oxford Street has them too, but I luckily never had to look there.
Okay, so once I had the equipment, I had to select my pictures. I knew I wanted our faces, so I went through my pictures trying to find clear shots of our heads with interesting expressions. Then I scanned them in at 300 dpi. I managed to get about four faces to each scan (since I didn’t need the rest of the photos and could overlap them a bit). Then using the Gimp (but Photoshop would do just as well), I isolated each face as its own image. Then I used the “oval” selection tool and set it to 20mm by 20mm (thus creating a circle the same size as my magnet). Then I just resized the image until the face fit just right inside the little circle. (Note: You need the high resolution so you get good sharpness and detail when you print. But since your screen can’t display that high, the circles will look way big. Relax; they’ll be the right size when you print.)
Okay, so then I copied and pasted each little face circle onto a blank image. (The idea is to cram as many on the page so you have to print as few sheets as possible.) I only did six for this first trial, but I duplicated them so I had twelve altogether on one sheet. Then I whacked this on a Zip disk and headed ’round the corner to the Copy Shop. Fifteen minutes and a buck-fifty later, I had my pictures.
After that, the rest was easy. I didn’t even bother with putting card down on the magnets first; the paper was nice and thick so I didn’t think it would bleed. None of the ink has run at all, which some people said they experienced using Bubble Jet-printed photos. The sealer still needs a day or two to fully set, but I’m going to declare the photo magnet experiment a success.
As the weather gets colder here, my urge to bake kicks in. Yesterday I got a hankering for 
Since the deadline for mailing has come and gone, I’ve taken the liberty of posting theartwork and liner notes for “Summer Down Under 2002”, my 