I spent the morning scouring the Internet for images to use for some Thanksgiving marble magnets. I’m going to print them out on a color laser printer and then put the magnets together this afternoon. In case any of you would like to do the same, I’ve provided my image sheet for you to use. Here’s the low-res version so you can see all the different designs. There are some cartoons, some stylized images, and even some Norman Rockwell scenes. If you want to use them, download the high-res version. It’s at 300 dpi, which should give you a nice crisp image when you print. They’re designed for 20 mm diameter magnets, so if you need them larger or smaller, you might need to change the resolution slightly. Have fun!

It worked! My cunning plan worked. Instead of using magazine pictures, I successfully put the Snook’s and my faces under the marbles. (Apologies for my crappy camera. They really do look pretty good.) I’d read that using Bubble Jet-printed images wouldn’t work, because the ink is water soluble and runs when you put the glue on it. I had a hunch that color laser printed photos would work better. And they did!

I tried to follow Megan’s instructions as closely as possible. For you Sydneysiders: I found the magnets (20 mm diameter) at the big Lincraft store in the Imperial Arcade on Pitt Street. They were randomly hanging in the aisle with all the clay. For glue, I got silicone window sealer from my local Mitre 10 hardware store. It came with a long plastic cone/applicator, but I just tossed that. The marbles, as you all know, were the difficult part. In the end I found them at Eastern Flair on King Street in Newtown. (I bought all the clear ones they had, though, so don’t bother trying them for a while.) I also heard that the “Reject Shop” on Oxford Street has them too, but I luckily never had to look there.

Okay, so once I had the equipment, I had to select my pictures. I knew I wanted our faces, so I went through my pictures trying to find clear shots of our heads with interesting expressions. Then I scanned them in at 300 dpi. I managed to get about four faces to each scan (since I didn’t need the rest of the photos and could overlap them a bit). Then using the Gimp (but Photoshop would do just as well), I isolated each face as its own image. Then I used the “oval” selection tool and set it to 20mm by 20mm (thus creating a circle the same size as my magnet). Then I just resized the image until the face fit just right inside the little circle. (Note: You need the high resolution so you get good sharpness and detail when you print. But since your screen can’t display that high, the circles will look way big. Relax; they’ll be the right size when you print.)

Okay, so then I copied and pasted each little face circle onto a blank image. (The idea is to cram as many on the page so you have to print as few sheets as possible.) I only did six for this first trial, but I duplicated them so I had twelve altogether on one sheet. Then I whacked this on a Zip disk and headed ’round the corner to the Copy Shop. Fifteen minutes and a buck-fifty later, I had my pictures.

After that, the rest was easy. I didn’t even bother with putting card down on the magnets first; the paper was nice and thick so I didn’t think it would bleed. None of the ink has run at all, which some people said they experienced using Bubble Jet-printed photos. The sealer still needs a day or two to fully set, but I’m going to declare the photo magnet experiment a success.

Lance in Space!
At long last, I present to you my magnum opus. Twenty-two space age songs with a heap of surprise sound effects. I even threw in a robot! The artwork and complete track listing are now online for your perusal. (If you’re one of my swappees, you might want to wait so as not to spoil the surprise.) Oh, and see if you can spot the monkey!